HOME  >>  PRODUCT >> YTH outside outfit type slow pulley

YTH outside outfit type slow pulley

YTH outside outfit type slow pulley
The introduction of Germany advanced electric drum production technology, hard tooth face of planetary gear transmission, smooth operation, low noise, strong carrying capacity, large range of power.Configurable hydraulic coupling, non-return device, brake, particularly suitable for all kinds of harsh environments and flame-proof requirement of large and medium-sized drive device of belt conveyor.YTH outside outfit type slow roller is consists of cylinder body, drive and motor bracket (Ⅱ type motor bracket).Drum body mainly includes drum shell, support, and within the drum of the reducer.Drive mainly including motor, coupling, hydraulic coupling, non-return device, such as brake components.Motor bracket is with steel welded together, used to install the motor and the shield, the user can also according to the need to design and manufacture.

YTH outside outfit type slow roller specifications:
Electric drum diameter: 400 500 630 800 1000
Drum bandwidth (B) : 500 650 800 1000 1200 650
Motor power (kw) : 2.2 2.2, 3, 4, 5.5 7.5 11 15 and 30 and 45 to 55 75 90 110 132 160
Tape speed (m/s) : 0.32 0.4 0.5 0.63 0.8 1.0 1.25 1.6 2.0 2.5 3.

A list,

YTH outside outfit type electric roller was put in the cylindrical shell will retarding mechanism, external vertical or horizontal motor, used for belt conveyor is a new type of drive.The product has the following features:
1, YTH type electric roller due to external motor and motor failure rate greatly reduced, and convenient installation and maintenance; 
2, due to the motor cooling conditions improved, to adapt to the small bandwidth, high power, the selection of shell plastic bags and other requirements; 
3, use a variety of retarding mechanism, the efficiency of more than 85%; 
Second, the product order code
When the user to place an order for this product, need to put forward the following four parameters:
Power (P), tape velocity (V), tape width (B), roller diameter (D). 
Example: order power P = 11 kw, tape velocity V = 1.6 m/s, B = 800 mm tape width, roller diameter D = 500 mm mounted electric drum, code-named order:
YTH - 11-1.6-800-800
YTH - product model (mounted electric drum)
11-11 p, unit power: KW
1.6 - tape speed unit: M/S
800 - tape width B, unit: mm
500 - roller diameter D, unit: mm
Note: when the user needs to have the function of non-return mounted electric drum, YTHN product model
Determine the direction of rotation: observation on the motor terminal box end, clockwise for "S", counterclockwise for "N".